Click picture for larger image	Click picture for larger image
One thing we really liked about this case the the ability to support a 60" jack.	The Jack Guard case and the parts included.

Fortunately, Polymer Products have come out with a rugged plastic case for the Hi-Lift jack called Jack Guard. This durable case will house the jack and protect it from nature's elements. The Jack Guard case has many features that make it a better choice compared to the vinyl cover. The jack guard case will never let your jack get rusty since it offers a watertight seal four your jack. It also keeps the jack mechanism free from dirt and mud.

Features:

• Full 2 year warranty
• Tool storage in end panel
• Room for extra gloves, rags, etc. inside case
• Designed so that jack can never sit in water
• Available in extra length for 60" jack
• Quick release mounting strap available
• Carrying handle balanced and large enough for heavy gloves
• Made of polyethylene to withstand heat and cold
• Lockable

Click picture for larger image	Click picture for larger image
At the bottom of the case, there's a place for and adjustable wrench and pliers plus added storage for gloves, chain, or any extra jack accessories you might have.	For added protection against theft, the Jack Guard case has locking capabilities with this stainless steel strap.

The case is blow-molded of H.D.P.E. which, is a very durable plastic. The handle is large enough for heavy gloves and will actually balances the jack when carried. There's room inside for extra gloves, rags, etc. The end panel flips down which has a recess to snap in pliers and an adjustable wrench (tools can also be ordered as an option). This hard case makes storing the jack inside you new 4x4 ideal since there is no risk of getting grease on the new carpet. Also available are stainless steel mounting brackets. Unlike the vinyl cover, this hard plastic case will offer better protection for the jack. What we really liked is it covered the entire length of our 60" jack where the vinyl cover only covered 48" of the jack since it's a "one size fits all" cover. Polymer Products also makes a case designed for the 48" jack. With the added storage for gloves and misc. items and locking capabilities, this case is a must have for the Hi-Lift jack.

Installation:

The installation is simple and straightforward. The extended end of the case is installed to fit the 60" jack. The case can then be mounted either inside or outside of the vehicle. Jack Guard may be mounted in any angle however; it's recommended that it be horizontal. The case should be mounted on a secure flat structure, which our swing out tire carrier offered a good mounting point. Luckily, our spare tire mount was being modified so we were able to mount the jack case behind the tire. The straps are used as templates. Some additional metal for the mounts was needed for our application. The strap on the right side should be a slip fit. This will allow the case to be removed with out removal of the right side strap. The strap should be located near the square standoff. The left side strap is the quick release with locking abilities. After the Jack Guard is installed, the jack can be inserted in the case without removing the Jack Guard case. Another way to put the jack in the case is to remove the case from the mounting straps and install it over a standing jack. After the jack is inside the case, a pin is inserted through a hole. This ensures that the jack will always stay inside the case until the pin is removed.

Click picture for larger image	Click picture for larger image
We were able to fit the Jack Guard on the back of our swing out carrier.	Another view of the case mounted.

Conclusion:

The Jack Guard case is a great addition to the Hi-Lift jack. It's almost a necessity to have if you want to keep your jack in good working condition. With the features such as storage, tools, lockable, watertight, dirt/mud protection and full enclosure on longer jacks, the Jack Guard is a great buy.

sales@jackguard.com
(517) 723-9510