Even after
welding my previous aftermarket nerf bars on to my frame I found
that they simply were not strong enough to handle the abuse they
were given on the trails that I take my truck through. I knew
that something thicker and stronger was in order. I
personally did not want my nerf bars to be welded to the frame so I
set out to find something that was a direct bolt
on.
I found the perfect solution at A-1 Parts World,
now called simply JSM, in Rancho Cordova, CA. The nerf bars
are custom made by Joe for each application in his shop. They
use a C type mount with one 3/4" bolt at each
support.
I
chose to use the full longbed nerf bars on my truck even though I
have a flatbed. This allows me a step and keeps my truck from
dropping in to any enormous tire swallowing holes. The steel is
.120 wall square tubing and the C mount is made from 1/4"
steel. Unlike my previous bars I did not have to drill any
holes. Installation was amazingly simple.
After bolting the bars onto the
frame it was time for the first test....the High-Lift jack. I
was a bit worried since my previous nerf's flexed a matter of
inches and the new ones I had just put on were nearly touching my
cab already. To my amazement the bars barely deflected even
after I had jacked both tires on the one side off of the
ground!
It has passed the in-shop test and in order to
give them the real test I took my truck up to the Barrett Lake
Trail near the infamous Rubicon Trail. I did not hold back
when it came to the rocks, I drove over the tallest ones knowing
that I would be coming down hard on my brand new nerfs. I was
jarred pretty good several times as my front tire slipped over some
of the boulders and the nerf's came crashing down on the
rock. After finishing the trip I examined the bars carefully
and found where the rocks and slid along but no dents to be found
and the bars did not come up into the cab.
Since then I have
also tried the nerfbars out on the Rubicon Trail and I am extremely
happy with their performance. I since mounted a front bumper
also made by JSM and have found it to be equally bulletproof.
If you want something that can be mounted in a matter of minutes
with no vehicle modifications that can handle just about anything
try out one of JSM's products!
Contact Info
JSM
3054 Sunrise Blvd., Ste.
G
Ranch Cordova, CA
95742
(916)
638-5555
a-1@dgweb.com
Off-Road Videos - Check out over ten years of extreme 4x4 action, product testing and the Off Road Nation at play. Baja racing to rock crawling, ATVs in the sand to motorcycles in the dirt, it's all here. Rate them, share them and upload your own.
ATV Reviews - Honda, Suzuki, Yamaha, Polaris, Kawasaki, Can-Am. First rides to long-term tests, check out the latest in ATVs, UTVs and Side-by-Side vehicles of every make and model. Read expert opinions and follow custom project vehicles.
Own your very own Off Road Superstore..... How many times have you pondered the idea of owning your very own off road shop? Let the staff at Off Road Innovations, one of the largest aftermarket off road accessory dealers in the US, help turn your hobby into a profitable career. Go to www.offroadinc.net for more info or just call 800-809-6088.
MSD Ignition Rebate! Fire up with MSD Ignition and receive Cash for Cruising! Click on the link to find out the latest cash back rebate from MSD.