It also decreases handling on / off road and affects center of gravity so your chances of are greater. Performance Wheel & Tire has the fix for this. They design high strength wheel spacers for all kinds of cars, trucks and Jeeps. Performance carries many different sizes of spacers. All their spacers are made in house so it cuts out the middle man resulting in affordability. The quality of these spacers is superb.

Made from high quality 6061-T6 aircraft grade aluminum, there's no reason to worry about breaking or cracking. They make spacers in 4, 5, 6 or 8 lug ranging from widths of 1" to 2.75". Before we ordered, we measured the difference in length between our front and rear axle. Ours happened to be 3" of difference so we ordered the 1.5" spacers. Some axles are different so be sure to measure to get the proper size. On our 8 lug axle, our studs were 1.3" in length so a 1.25" spacer would have required the studs to be ground a little to fit.

Since no grinding had to performed, installation was quick and easy. The spacers only took 45 minutes to install.

Note: If your axles are the same length but you want a wider stance, you can install these on both front and rear axles. Benefits of wheel spacers:

• Redistributes center of gravity; reduces risk of rollover
• Better traction and cornering
• Vehicle can still use factory rims
• Wider tires can be placed on the factory rims
• Allows better control at greater inclined angles
• Looks much better!

1096 West Hampden Englewood, CO 80110 (303) 934-2929 http://www.performancewheel.com/