This month we will cover the Shackle Reversal Kit. This kit is fully bolt-on and requires no welding. I have been running this kit for over a year with spectacular results.

Stay tuned for the addition of the five inch combination kit that includes everything needed to give a full 25 inches of axle articulation.

January will bring along a new year and a 1600 engine swap. Are you thinking about this swap? I just completed mine and it is awesome!

Project Samurai

Front bumper hardware.	Shock mounting detail.
Remove front shackle.	Spring frame hanger bolts.
Stock rubber bushing removal.	Remove the stock bump stops.
New bump stop extension.	Poly and steel bushing.
Steel bushing replaces rubber.	Lube the new poly bushings.
Install poly bushing into spring.	New spring support.
Center bar frame support.	Spring hanger hardware.
Lube front spring frame bushing.	Install bushing and steel sleeve.
New front spring frame shackle.	Install bolts, don't over tighten.
Rear axle shackle removal.	Bushing comparison.
Stock to Calmini comparison.	Rear shackle install.