![]() All fittings are Earl's Steel fittings for their Speed-Flex hose. This is a stainless steel braided hose rated at 450° F and 2000 PSI.
Notes: The stock banjo bolts on the brake cylinders fit these banjos. Don't forget to put the hose fairleads (item 4) on (and in the right direction) before putting both hose ends on. Earl's provides directions for cutting the hose and attaching the ends. You'll need a couple wrenches, a hack saw or Dremel tool w/ cut-off wheel and some electrical tape. A bench vise is also very helpful when cutting the hose, but isn't absolutely needed Follow us on Twitter at www.twitter.com/OffRoadDotCom
| Enewsletters
Stay on Top of All the Action: |