Ramcharger Readers Rides

Nov. 01, 2005 By ORC STAFF
Welcome to the new Ramcharger/Trailduster Readers Rides section. This is the place where our readers can show off your rides! Please be patient while this page loads there are lots of graphics here!
Ryan Taylor's '89 Ramcharger

Ryan Taylor's 1989

blue 89' Ramcharger which was nicknamed "The Tank" by my friends..I It's features include: SuperCharged 318, Gabriel Air Shocks, Edelbrock RPM performance Intake, Flo Tech headers, 4" Dual Flows..nice low rumbling sound, New front and Rear Bumpers, Limo Tint, My quarter mile right now is 17.5, 31x10.5 inch Radial All Terrain Tires, New Hubs...working on rims The System: Pioneer 53w 40x4 cd Face, 2 6x9 Jbl's to replace the stock doors, 2 12" RF Punches in the back, 400 watt Amp under my seat. I got the truck when I was 15 I have had no problems with it besides the gas mileage..But since It was dualed out I have had less trouble with it. I will be putting a White racing stripe down the middle of it as soon as I get my rims..It's quite for a Ramcharger...My favorite races are with 350 Chevy Silverado's. I always love a challenge. I have put a lot of time and money into this truck, but I have only had it for a year and I am doing ok...
Matt's '91 Ramcharger

Ron Bennington's 1991

This is my 91 Dodge Ramcharger. It has a 318, 2wd, auto, paint scheme from the Viper GTS (the paint shop got the codes from a viper making it a copy, except i had the stripes moved farther apart), American Racing Wheels- Moonies, Hi-Flow Dual exhaust system.
Kevin's '77 Ramcharger

Kevin's 1977

Here is a pic of my 1977 Dodge Ramcharger. It has been converted to 3/4 ton, with Dana 60 rear, 44 front. The gears are 410's, 727 trans, 203 T-case, lockout hubs, and 33-12.5-16.5 TA's and Jackman wheels. The motor is a 426 wedge (RAMCHARGER 426) out of a 1965 Chrysler Crown Imperial. It has been modified with headers, Edelbrock performer RPM intake and carb, 9.5:1 pistons, performance RV cam, Mopar performance electronic ignition, Mallory pro Master coil, Accel 8.8mm wires, Moroso aircleaner top and base with a 4 inch x 14 inch K&N filter. I have also installed Rancho 9000's and a 6 inch lift kit, and borgesson steering shaft. Roll bar and a really trick stereo. I love my Ramcharger!!!!! I live in New Mexico where the 4 wheeling is great too!
Edward Zayas' '88 Ramcharger

Edward Zayas' 1988

318 cu.in. EFI-Lots of Chrome,Competition Cam: 270H with Lifters / Pushrods / Double Roller Timing Chain, High Volume Oil Pump,Headers with Dual Exhaust/Chrome Tips,2 1/2 Inch Suspension Lift with 33 Inch BFGoodrich Trail T/A's mounted on 15x10 Five Spoke Chrome USWHEEL's,Rancho Shocks all around, Hood Scoops from a 1969 SuperBee,Alpine Stereo System with Alpine Head Unit / Alpine EQ / 3 Amps(200/200/80watt)/ 2 Crossovers / 12 Speakers,40 Ch. CB with P.A., Dual Antennas,On-Board Remote Radar Detecter,Tinted Windows,Lund Sun Visor,R/T Emblems from a 1970 Challenger on Front Fenders and Rear Hatch,Dual Inlet Air Cleaner from a 1972 Roadrunner,Electric Cooling Fan,Rollbar,KC Driving Lights,Pushbar, Nerfbars,Chrome Tubular Grill,B&M Megashifter on the Floor,Overhead Console-holds lights, CB and EQ,Sun Tach,Grant Leather Steering Wheel,Plus a lot more Bruce Matthews' Ramcharger

Bruce Mathews' Truck

This was the first Ramcharger picture. It was submitted in 1997.       Anonymous Ramcharger

Anonymous Ramcharger

One big problem with editing a page like this is that you tend to accumulate stuff and forget what you were doing with it. I have here a series of images of an older truck in the process of being resurrected (these appear to be "before" pictures 8^> ). However, I can't find the message from the guy who sent them, so I can't identify the owner or photographer. Anyway, here they are:
Next page of Ramcharger Readers' Rides!

This page was last modified November 24, 1999

Off-Road.com Newsletter
Join our Weekly Newsletter to get the latest off-road news, reviews, events, and alerts!