 | October 9, 2008
By:Dean Waters
We contacted DMC about their recently-released twin system for the RZR and had one sitting on our doorstep in no time. Along with the dual exhaust system DMC also recommended their EFI module which is tuned to work with this combination. This combination will give the RZR a 21.2% increase in torque while keeping the sound levels to 96 db.
 |
 | October 9, 2008
By:Mike Lyon
Last month we rebuilt our Dana 60 front axle to get it ready for its new home under the front of Project Big Bad Chevy. This month we cover the actual installation process as we get our Chevy 4x4 truck ready for the trail.
|
 | October 9, 2008
By:Rick Sieman
I purchased a 2008 CRF230L in April and love riding again after 20 years. I would like to stiffen up the suspension and get some more power from the bike. How does this bike differ from the CRF230F?
|
 | September 30, 2008
By:Pete Bach
The Jeep JK Rubicon is an awesome 4x4 straight from the factory but definitely has some design flaws. We use Above Um All's new muffler relocation kit to move the vulnerable muffler to a much better location. Best of all the install is simple, the kit works and it is not that expensive! Read on for more.
|
 | September 25, 2008
By:Mike Lyon
Our big and bad Chevy pickup project gets a whole lot badder and stronger with the installation of one-ton axles front and rear. Follow along as we prep a Dana 60 front axle and 14 Bolt rear axle for installation in our Chevy 4x4.
|
 | September 24, 2008
By:Justin Fort
The progress on our little Toyota Rav4 project continues. In this installment we swap out our mild mannered street tires for some Dunlops more suitable for the dirt so we no longer have to worry about getting mired in the mud.
|
 | September 23, 2008
By:Eric Tabb
After riding the stock bike a few times it was clear we needed to make some upgrades to allow the 110 to hold up a 175 lb adult rider. These upgrades consisted of adding stiff fork springs to the stock forks and adding a new shock while still retaining the stock swingarm. These modifications were very affordable and the installation process straightforward.
|
 | September 7, 2008
By:Rick Sieman
Question: I was wondering about changing the clutchs there a lock nut on there but im not sure if ts reversd threads or what cause i cant seem to get it off. what should i do ?
|
 | August 29, 2008
By:Dean Waters
In this installment we make a dramatic change in both the looks and handling department, with wheels from Motorsports Alloys and tires from Maxxis. First we need to tell you a little bit about what we chose and why.
|
Untitled Document Off-Road Videos -
Check out over ten years of extreme 4x4 action, product testing and the Off Road Nation at play. Baja racing to rock crawling, ATVs in the sand to motorcycles in the dirt, it's all here. Rate them, share them and upload your own.
|
 ATV Reviews -
Honda, Suzuki, Yamaha, Polaris, Kawasaki, Can-Am. First rides to long-term tests, check out the latest in ATVs, UTVs and Side-by-Side vehicles of every make and model. Read expert opinions and follow custom project vehicles. |
 Axxxtion Sports.....
Axxxtion Sports is heating things up with their 2010 Winter Heat snowmobile calendar! Simply Sexy! |
| 
