Frank Kuehnl (Kuehnlfr@webtv.net)
dave, good idea, i should have posted this earlier... the oil filter goes on both ways, there is no difference. it
will the anti drainback valve unseats when the filter is removed. remove the flter first, be carefull, it may be hot. use a large pan to drain the oil into. some jackass decieded to
put the replace all of the "o" rings on the oil filter
housing. tighten the housing to the spec molded into it. good luck, frank
=======================================================================
| Enewsletters
Stay on Top of All the Action: |