Engine Components and Performance

• K & N Reusable Air Filter element, carb. models - fits stock filter case $36.
• K & N Recharger Kit - spray cleaner and oil $7.
• Rebuilt Starter - 2 year warrenty / core return required $65.
• Rebuilt Alternator - 2 year warrenty / core return required $90.
• Standard Clutch Kit - Cover, plate, Alignment tool, T/O and pilot bearing $120.
• "Dual-Friction" (III) - H.D. Clutch cover & composite friction plate - virtually bulletproof $200.
• Weber Downdraft Carburetor Kits - up to 20% HP increase* Call.
• Solex 34/34 Downdraft offroad carb kit w/ "zero gravity bowl"* Call.
• Dual Dellorto / Mukuni / Weber Sidedraft Carburetor Kit - up to 40% HP increase* Call.
• "Wide Band" Cam - Torque and HP increase across entire RPM range, (regrind)* $100.
• "Enduro" Head, 3 angle valve job, ported, relieved, surfaced, etc(exchange)* $300.
• "Tourqer" Header - Increased horsepower and torque, w/ O2 ftg & heat riser (bare)* $100.
• Supercharger Kit - (less carb) Excellent kit, well documented, put your Samurai on Steroids* $1450.
• NEW! 1600cc Engine Swap Support Kit - Engine plate, mount and support hardware $175.

* NOTE; Please check your local / State smog laws and regulations. Engine performance products are intended for use only on Off-Road / Competetion / Show Vehicles that will not be driven on the street.

Ride and Suspension Components

• Rancho 1-1/2" lift springs - 4 springs with bushings $343. Old Man Emu Springs - 2" Lift, from Australia, special flat mount centers, standard/H.D.^ $364/$426.
• Soft Ride OME shocks - Rates matched to above springs, (also avail. for stock), each $36.
• Trailmaster 3"Lift - Springs / Complete Kit Call.
• National Springs - 3", Best - all around springs , street / H.D. trail $240/$315.
• 3" Body Lift Kit - Quickest way to gain more tire clearance^.. $75.
• Graphite-Poly Bushings - with super sticky grease. Set for two springs and frame $20.
• Spring Shackles - replaces weak stockers 3/4" lift, Rec.with lift springs for full travel. Blk/Flt Chrm^$25/$30.
• Hi-lift Shackles - 1-3/4" and 2" Lift, heavy duty pairs^ $35.
• U-Bolts - HD. 1/2" Alloy w/ Ny-Lock locknuts, The stock ones are soft and stretch $20.
• 3" Drop Pitman Arm - Reduces bump steer on all lifts . $80.
• Steering Stabilizer Kit - Cylinder and brackets - Wheel won't jerk in your hands! $50.
• Progressive Poly bumpstops - Bump stops should bottom before your shocks, pairs $30.
• Angle Shims, spring center bolts, bushing lube, Spring slip pads, etc. Call Monroe Gas-Matics Call.
• Rancho 9000 Shocks - Ultimate 5 way adjustable shock Call.

NOTE; Please check your local / State vehicle height and lift laws, lifts beyond those are intended for use on ly on Off-Road / Competetion / Show Vehicles that will not be driven on the street.

Gearing and Traction

• "RockLobster" T-case Kit -12% red. High, -83% (4.16:1) Low reductions, for the serious crawler $685.
• Richmond 4.56:1 Ring & Pinion Gears - 22% reduction $235. 4.625:1 (25%), 5.125:1 (37%) & 5.375:1 (44%) Ring & Pinions with Sammy adapter kit - in stock! $290.
• NEW! 5.625 Ring & pinion with Sammy adapter kit $315.
• Installation Kits for Ring & Pinions / Complete diffs, ship'd UPS - built to your spec.'s Call
• Lock-Right Diff Locker - Biggest offroad ability improvement for the buck - Std / Dlx $210/$285.
• Power Brute / Auburn Limited Slip Differential - Great in slippery stuff, Easy on the road $390/Call.
• "ZUK" TracBar - For high torque Samurais, anti-wrap, full travel $190. Rear Dual Shock Mounts - Stager shocks to reduce axle wrap . $75.

Bumpers, Shields and Guards

• Grill and Brush Guard - Mounts with stock bumper $150.
• Front Double Tube Bumper - 3" with grill hoop $100.
• ARB Deluxe WinchBull Bumpers with grill & brush guard, Top Quality, fits Warn 5000 - 8000mx . $410.
• Rear H.D. Channel Bumper $100..
• Rocker Panel Steel Diamond Plates, blk powder coat semi-gloss . $80.
• 3" Nerf Bars - big and bold $110.
• 2" H.D. Nerf bars - thick wall, good clearance $145.
• Pumpkin Hats, 3/8" thick., curved rock proof shields to protect your diff housings, pair $80.
• ORP "Go Rhino!" or Con-Fer "Tuff-Stuff" Axle Trusses - Extra weight, rocks or jumps? $105.
• Belly Pan - Frame rail to frame rail, Keeps mud and rocks out of the works . $85.

Special Trim and Misc.

• Stainless Steel Door hinges / Tailgate Hinges - Allen key bolts $55 / $35.
• Stainless Steel Rocker Panel Entry Guards $45.
• Fold Down Windshield Kit - Complete, Hinges, Latches, Stand-offs and Hardware $75.
• Locking Steel Storage Box - The only safe place in a convertible - $115.
• Convertible Top Clear Window Care Products that really work! $6.50 To remove haze and fine scratches - Clear plastic haze remover and cleaner, 8oz, ask for #17
  To seal and polish windows after using #17 - Clear plastic seal and polish, 8 oz, ask for # 10
  To keep new windows looking new - Clear plastic cleaner / polish spray, 8 oz, ask for #18
  
• Timken Front Wheel Bearings - Outlasts stock, Costs less!, each . $20.

  Victory Engineering - If you don't see it here please call for a quote (310) 793-8585 For our next Catalog and decal please send $3, refundable with your first order.

  Prices are quoted are in current United States Dollars ($) for cash, check and money order sales at our door. Additional Charges; Call for delivery charge; Regular Ground, 3 Day Select, 2 Day Air, and Next Day Air delivery available thru United Parcel Service.. ALSO ADD; +$5 if ordered C.O.D.; +5% for Credit Card Sales; +8.25% Sales Tax for California residents .

  Support beyond your order; As a special service to our customers we have an inventory of the frequently needed factory parts. We are also working on many new product. More will be developed if the demand is there. Let us know. We are always interested in "close-outs" in your area and may even market your own inventions for the Samurai.

  Victory Engineering
  Attn. Mario Raco
  20936 Amie Ave#13
  Torrance, CA,90503
  (310) 793-8585
  Email: LimboMn@aol.com

  Victory Engineering Home Page