The A2000. This exceptional, basic ATV winch can grow and change as your needs change. The heartbeat of the A2000 is a 0.9hp permanent magnet motor that drives high performance pulling power. To control the winch direction, the A2000 uses a heavy-duty, fixed switch that mounts to the rack or handlebars of the ATV. The power-interrupt solenoid only allows the winch to be used if the ATV's ignition is "ON". Included is a steel, hawse-style fairlead that minimizes abrasion and damage to the wire rope. Modify the A2000 as your needs change. Choose different switches and control packs. You can even increase the pulling capacity. So your investment grows as your needs change.

Part Numbers/Specifications

Rated Line Pull: 2000 lbs./907 kgs. (single-line)
Motor: 0.9 hp, 12V DC
Control: Manual, remote-mounted
Gear Train: 3-Stage Planetary
Gear Ratio: 136:1
Lubrication: Aeroshell #17
Clutch [freespooling]: Cam Activated
Drum Diameter/Length: 2.0"/3.15", 5cm/8cm
Weight: 23 lbs./11 kgs.
Wire Rope: 50', 3/16" diameter (15m, 5mm diameter)
Fairlead: Hawse
Remote Control: Not included
Battery Leads: Included
Finish: Argent
Warranty: 12 months

WARNING: To prevent serious injury: Do not use winches as hoists. Do not use winches to move people. Keep hands clear of wire rope and fairlead opening during operation and when spooling. Do not submerge. Not intended for commercial use.