How To: DMC Dual Exhaust System for Polaris RZR Project Weekend Warrior RZR Oct 9, 2008 By: Dean Waters

We contacted DMC about their recently-released twin system for the RZR and had one sitting on our doorstep in no time. Along with the dual exhaust system DMC also recommended their EFI module which is tuned to work with this combination. This combination will give the RZR a 21.2% increase in torque while keeping the sound levels to 96 db.

Project Big Bad Chevy: One-Ton Axle Install Part II Oct 9, 2008 By: Mike Lyon

Last month we rebuilt our Dana 60 front axle to get it ready for its new home under the front of Project Big Bad Chevy. This month we cover the actual installation process as we get our Chevy 4x4 truck ready for the trail.

Project Honda CRF230F: Answers and Illustrations Oct 9, 2008 By: Rick Sieman

I purchased a 2008 CRF230L in April and love riding again after 20 years. I would like to stiffen up the suspension and get some more power from the bike. How does this bike differ from the CRF230F?

Jeep Rubicon JK Project: The Above Um All Muffler Relocation Kit Sep 30, 2008 By: Pete Bach

The Jeep JK Rubicon is an awesome 4x4 straight from the factory but definitely has some design flaws. We use Above Um All's new muffler relocation kit to move the vulnerable muffler to a much better location. Best of all the install is simple, the kit works and it is not that expensive! Read on for more.

Project Big Bad Chevy: One Ton Axle Swap Sep 25, 2008 By: Mike Lyon

Our big and bad Chevy pickup project gets a whole lot badder and stronger with the installation of one-ton axles front and rear. Follow along as we prep a Dana 60 front axle and 14 Bolt rear axle for installation in our Chevy 4x4.

Rav4 Crawler: New Tires and Wheels Sep 24, 2008 By: Justin Fort

The progress on our little Toyota Rav4 project continues. In this installment we swap out our mild mannered street tires for some Dunlops more suitable for the dirt so we no longer have to worry about getting mired in the mud.

Project Kawasaki KLX 110 Pitbike: Suspension Marzocchi upside down forks, BBR Rear End, Elka shock Sep 23, 2008 By: Eric Tabb

After riding the stock bike a few times it was clear we needed to make some upgrades to allow the 110 to hold up a 175 lb adult rider. These upgrades consisted of adding stiff fork springs to the stock forks and adding a new shock while still retaining the stock swingarm. These modifications were very affordable and the installation process straightforward.

Project Honda CRF230F: Reader Questions Sweating the Small Stuff - Dirtbike Style Sep 7, 2008 By: Rick Sieman

Question: I was wondering about changing the clutchs there a lock nut on there but im not sure if ts reversd threads or what cause i cant seem to get it off. what should i do ?

Project Weekend Warrior RZR: Wheels and Tires Phase 1 for Polaris RZR Aug 29, 2008 By: Dean Waters

In this installment we make a dramatic change in both the looks and handling department, with wheels from Motorsports Alloys and tires from Maxxis. First we need to tell you a little bit about what we chose and why.